LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> GS 450h >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Park Assist/Monitoring >> Ultrasonic Sensor >> Removal

Ultrasonic Sensor: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE FRONT BUMPER ASSEMBLY  (See REMOVAL )
  3. REMOVE NO. 3 ULTRASONIC SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the sensor from the sensor retainer as shown in the illustration.
      Fig 1: Removing Sensor From Sensor Retainer
      G05820196Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the sensor retainer as shown in the illustration.
      4. Fig 2: Removing Sensor Retainer
      G05820197Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE REAR BUMPER NO. 1 PLATE  (See REMOVAL )
  5. REMOVE REAR BUMPER ASSEMBLY  (See REMOVAL )
  6. REMOVE NO. 2 ULTRASONIC SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the sensor retainer.
    3. Remove the sensor from the rear bumper.
      Fig 3: Removing No. 2 Ultrasonic Sensor
      G05820198Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE NO. 1 ULTRASONIC SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the sensor retainer.
    3. Remove the sensor from the rear bumper.
      Fig 4: Removing No. 1 Ultrasonic Sensor
      G05820199Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals