LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> GS 450h >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Park Assist/Monitoring >> Ultrasonic Sensor >> Installation

Ultrasonic Sensor: Installation

  1. INSTALL NO. 1 ULTRASONIC SENSOR 
    1. Install the sensor to the rear bumper.
    2. Install the sensor retainer as shown in the illustration.
    3. Connect the sensor connector.
      Fig 1: Installing No. 1 Ultrasonic Sensor
      G05820203Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 ULTRASONIC SENSOR 
    1. Install the sensor to the rear bumper.
    2. Install the sensor retainer as shown in the illustration.
    3. Connect the sensor connector.
      4. Fig 2: Installing No. 2 Ultrasonic Sensor
      G05820204Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL REAR BUMPER ASSEMBLY  (See INSTALLATION )
  4. INSTALL REAR BUMPER NO. 1 PLATE  (See INSTALLATION )
  5. INSTALL NO. 3 ULTRASONIC SENSOR 
    1. Install the sensor retainer to the front bumper.
      Fig 3: Installing Sensor Retainer
      G05820205Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the sensor as shown in the illustration.
    3. Connect the sensor connector.
      4. Fig 4: Installing Sensor
      G05820206Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL FRONT BUMPER ASSEMBLY  (See INSTALLATION )
  7. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  8. ADJUST FOG LIGHT AIM  (See INSTALLATION )
scientia non olet · About LEMON Manuals