LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> GS 350 AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A760H Automatic Transaxle >> Floor Shift Assembly >> Removal

Floor Shift Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH  (See REMOVAL )
  3. REMOVE CONSOLE UPPER PANEL ASSEMBLY  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH  (See REMOVAL )
  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  6. REMOVE CONSOLE BOX PLATE  (See REMOVAL )
  7. REMOVE CONSOLE BOX REGISTER ASSEMBLY  (See REMOVAL )
  8. REMOVE CONSOLE BOX  (See REMOVAL )
  9. REMOVE NO.2 CONSOLE BOX DUCT  (See REMOVAL )
  10. REMOVE FRONT EXHAUST PIPE ASSEMBLY 

    (See REMOVAL )

  11. REMOVE FRONT FLOOR HEAT INSULATOR NO.1  (See REMOVAL )
  12. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY 
    1. Remove the nut and separate the floor shift gear shifting rod sub-assembly.
  13. REMOVE FLOOR SHIFT ASSEMBLY 
    1. Disconnect the connectors.
      Fig 1: Locating Shifting Rod Sub-Assembly Nut
      G05294795Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 bolts.
    3. Remove the floor shift assembly.
scientia non olet · About LEMON Manuals