LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> GS 350 AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A760H Automatic Transaxle >> Floor Shift Assembly >> Inspection

Floor Shift Assembly: Inspection

  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Connect the park/neutral position switch connector.

      Standard resistance 

      STANDARD RESISTANCE SPECIFICATION

      Shift Position Tester Connection Specified Condition
      S, "+" and "-" 3-7 Below 1 Ω
      Except S, "+" and "-" ↑ 10 kΩ or higher
    2. Disconnect the transmission control switch connector of shift lock control unit assembly.
    3. Measure resistance according to the value(s) in the table below when the shift lever is moved to each position.
      Fig 1: Identifying Transmission Control Switch Connector
      G05294808Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals