How To Proceed With Troubleshooting

HINT:

• Use these procedures to troubleshoot the seat belt warning system.
• *: Use Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT 

2. INSPECT BATTERY VOLTAGE 

   Standard voltage: 

   11 to 14 V 

   If the voltage is below 11V, recharge or replace the battery before proceeding.

   NEXT 

3. CHECK COMMUNICATION FUNCTION OF MULTIPLEX COMMUNICATION SYSTEM (BEAN)* 
   1. Use Techstream to check if the Multiplex Communication System (MPX) is functioning normally.

      Result: 

      RESULT REFERENCE
      
      

      Result	Proceed to
      MPX DTC is not output	A
      MPX DTC is output	B

   B :  Go to MULTIPLEX COMMUNICATION SYSTEM

   A : Go to next step. 

4. PROBLEM SYMPTOMS TABLE 

   Result: 

   RESULT REFERENCE
   
   

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

   B :  Go to step  7

   A : Go to next step. 

5. OVERALL ANALYSIS AND TROUBLESHOOTING* 
   1. DATA LIST / ACTIVE TEST (See DATA LIST / ACTIVE TEST  )
   2. Terminals of ECU (See TERMINALS OF ECU  )
   3. On-vehicle Inspection (See ON-VEHICLE INSPECTION  )

   NEXT 

6. REPAIR OR REPLACE 

   NEXT 

7. CONFIRMATION TEST 

   NEXT : END