Brake Actuator: Reassembly

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL BRAKE ACTUATOR
1. Install the actuator to the brake actuator bracket assembly with the 2 nuts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  NOTE: Do not remove the hole plug before installing a new brake actuator because the brake actuator is filled with brake fluid.
  
  Fig 1: Identifying Brake Actuator Bracket Assembly With Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002