Rear Console Box: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR CONSOLE BOX ASSEMBLY
1. Connect each connector.
  
  Fig 1: Locating Console Box Retainer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 4 clips.
  
  Fig 2: Identifying Rear Console Box Assembly Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 screws.
  
  Fig 3: Locating Rear Console Box Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the 2 bolts.
  
  Fig 4: Locating Rear Console Box Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Install the rear console box assembly with the 2 bolts.
  
  Fig 5: Locating Rear Console Box Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
1. Engage the 6 clips and install the console rear end panel sub-assembly.
  
  Fig 6: Identifying Console Rear End Panel Sub-Assembly Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE BOX CARPET
1. Install the console box carpet.
  
  Fig 7: Identifying Console Box Carpet
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE BOX POCKET
1. Install the console box pocket.
INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/o Seat Heater System) (See INSTALLATION )
INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/ Seat Heater System) (See INSTALLATION )
INSTALL UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE (See INSTALLATION )

Fig 8: Identifying Console Box Pocket
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )