LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Meter) >> Steering Pad Switch >> Inspection

Steering Pad Switch: Inspection

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT STEERING PAD SWITCH 
    1. Remove the steering pad switch.
      Fig 1: Inspecting Steering Pad Switch
      G05252895Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Condition
      d1-7 (DISP) - d1-8 (EAU) DISP switch is not pushed in 10 kΩ or higher
      d1-7 (DISP) - d1-8 (EAU) DISP switch is pushed in Below 1 Ω

      HINT:

      If the value is not as specified, replace the steering pad switch.

scientia non olet · About LEMON Manuals