LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Meter) >> Light Control Rheostat >> Removal

Light Control Rheostat: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  3. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE NO. 1 SWITCH HOLE BASE 
    1. Disengage the 4 clips.
    2. Disconnect each connector and remove the No. 1 switch hole base.
      Fig 1: Identifying No. 1 Switch Hole Base Clips
      G05252898Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE LIGHT CONTROL RHEOSTAT 
    1. Disengage the 2 claws and remove the light control rheostat.
    Fig 2: Identifying Light Control Rheostat Claws
    G05252899Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals