Park/Neutral Position Switch: Inspection
WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.
Standard resistance:
RESISTANCE SPECIFICATIONShift Position Tester Connection Specified Condition P 1 (RB) - 3 (PL)and 4 (B) - 9 (L) Below 1 Ω Except P ↑ 10 kΩ or higher R 2 (RL) - 1 (RB) Below 1 Ω Except R ↑ 10 kΩ or higher N 1 (RB) - 8 (NL) and 4 (B) - 9 (L) Below 1 Ω Except N ↑ 10 kΩ or higher D, S, "+" and "-" 1 (RB) - 7 (DL) Below 1 Ω Except D, S, "+" and "-" ↑ 10 kΩ or higher Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If operation cannot be done as specified, replace the park/neutral position switch.
- Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.