Emission Control: Canister: Installation

1. Install the 2 bolts, clip and charcoal canister.

   Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf) 

   Fig 1: Locating Bolts, Clip & Charcoal Canister

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the purge line hose to the charcoal canister.
3. Connect the wire harness clamp.
4. Connect the vapor pressure sensor connector.
5. Connect the charcoal canister filter sub-assembly to the charcoal canister.
   Fig 2: Locating Charcoal Canister Filter Sub-Assembly

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Connect the fuel tank vent hose to the charcoal canister.
   Fig 3: Locating Fuel Tank Vent Hose

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

(See INSTALLATION )