Data List / Active Test

HINT:

Using Techstream Data List allows switch, sensor, actuator, and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

1. Connect Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the tester on.
4. Enter the following menus: Body Electrical / Main Body / Data List.
5. Read the Data List according to the display on the tester.

   Main Body: 

   MAIN BODY DATA LIST
   
   

   Tester Display	Measurement Item/Range	Normal Condition
   D Dor Cty SW	Driver side door courtesy light switch signal/ON or OFF	ON: Driver side door is OPEN OFF: Driver side door is CLOSED
   P Dor Cty SW	Passenger side door courtesy light switch signal/ON or OFF	ON: Passenger side door is OPEN OFF: Passenger side door is CLOSED
   RR Dor Cty SW	Rear right door courtesy light switch signal/ON or OFF	ON: Rear right door is OPEN OFF: Rear right door is CLOSED
   RL Dor Cty SW	Rear left door courtesy light switch signal/ON or OFF	ON: Rear left door is OPEN OFF: Rear left door is CLOSED
   D Lock Pos SW	Driver side door lock position switch signal/ON or OFF	ON: Driver side door is unlocked OFF: Driver side door is locked
   P Lock Pos SW	Front passenger side door lock position switch signal/ON or OFF	ON: Front passenger side door is unlocked OFF: Front passenger side door is locked
   RR Lock Pos SW	Rear right door lock position switch signal/ON or OFF	ON: Rear right door is unlocked OFF: Rear right door is locked
   RL Lock Pos SW	Rear left door lock position switch signal/ON or OFF	ON: Rear left door is unlocked OFF: Rear left door is locked
   Lugg Courtesy SW	Luggage compartment door courtesy light switch signal/ON or OFF	ON: Luggage compartment door is OPEN OFF: Luggage compartment door is CLOSED
   D/L SW-Lock	Door control switch lock signal/ ON or OFF	ON: Door control switch is pushed to lock position OFF: Door control switch is not pushed to lock position
   D/L SW-Unlock	Door control switch unlock signal/ ON or OFF	ON: Door control switch is pushed to unlock position OFF: Door control switch is not pushed to unlock position
   Dor Key SW-Lock	Driver door lock/unlock switch lock signal (key-linked lock switch)/ON or OFF	ON: Driver side door key cylinder is turned to lock position OFF: Driver side door key cylinder is turned to unlock position
   Dor Key SW-Ulck	Driver door lock/unlock switch unlock signal (key-linked unlock switch)/ON or OFF	ON: Driver side door key cylinder is turned to unlock position OFF: Driver side door key cylinder is turned to lock position
   D Dor Key SW-UI	Driver door lock/unlock switch unlock signal (2 times key-linked unlock switch)/ ON or OFF	ON: Driver side door key cylinder is turned to unlock position OFF: Driver side door key cylinder is turned to lock position

HINT:

Performing Techstream Active Test allows relays, VSVs, actuators, and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

1. Connect Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the tester on.
4. Enter the following menus: Body Electrical / Main Body / Active Test.
5. Perform the Active Test according to the display on the tester.

   Main Body: 

   MAIN BODY ACTIVE TEST REFERENCE
   
   

   Tester Display	Test Part	Control Range
   Door Lock	Operate door lock motor	LOCK/UNLOCK
   D Door Unlock	Operate driver door lock motor	LOCK/UNLOCK
   Shock Unlock	Operate collision door lock release function	LOCK/UNLOCK
   Trunk/Bdor Open	Operate luggage compartment door lock motor	UNLOCK