Data List / Active Test
- READ DATA LIST
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Operate the Techstream according to the display and select "Data List".
Clearance warning ECU:
TESTER DISPLAY NORMAL CONDITIONTester Display Measurement Item/Range Normal Condition Diagnostic Note MAIN SW Clearance sonar main switch / OFF or ON OFF: Clearance sonar main switch OFF
ON: Clearance sonar main switch ON- ECU TYPE Type of clearance warning ECU / NORMAL or STEER NORMAL: Normal clearance sonar type STEER: Steering sensing type FL SENS Front left sensor information / UNDTCT, LONG, M LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected LONG: Detected (long-range) M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- FR SENS Front right sensor information / UNDTCT, LONG, M LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- RL SENS Rear left sensor information / UNDTCT, LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- RL CENTER SENS Rear left center sensor information / UNDTCT, LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- RR CENTER SENS Rear right center sensor information / UNDTCT, LONG MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- RR SENS Rear right sensor information / UNDTCT, LONG MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen) BLINK: Blink (All displays blinking)- PARKING SIGNAL Parking signal / OFF or ON OFF: Except P position
ON: Shift lever position is P- REVERSE SIGNAL Reverse signal / OFF or ON OFF: Except R position
ON: Shift lever position is R- VEHICLE SPEED Vehicle speed signal / SN STOP or SN WORK SN STOP: Vehicle speed is 10 km/h or more
SN WORK: Vehicle speed is below 10 km/h- SONAR DETECTION Sonar detection condition / STOP or WORK STOP: Sonar detection is not operating
WORK: Sonar detection is operating- #CODE Number DTCs recorded / Min.: 0 or Max.: 255 - -
- PERFORM ACTIVE TEST
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Following the display on the Techstream, perform the "Active Test".
Clearance warning ECU:
TESTER DISPLAY NORMAL CONDITIONTester Display Test Part Control Range Diagnostic Note BUZZER Rear buzzer (Clearance warning buzzer) STOP or OPERATE -