DTC P0705 Transmission Range Sensor Circuit Malfunction (PRNDL Input); DTC P0850 Park / Neutral Switch Input Circuit: Description
The Park/Neutral Position (PNP) switch detects the shift lever position and sends signals to the ECM.
DTC DETECTION CONDITION CHART
| DTC No. |
DTC Detection Condition |
Trouble Area |
| P0705 |
- Any 2 or more signals of the following are ON simultaneously (2-trip detection logic)
- P input signal is ON.
- N input signal is ON.
- R input signal is ON.
- D input signal is ON.
- When any of following conditions is met for 2.0 sec. or more in the S position (2-trip detection logic)
- P input signal is ON.
- N input signal is ON.
- R input signal is ON.
- All switches are OFF simultaneously for P, R, N and D positions (2-trip detection logic)
|
- Open or short in park/neutral position switch circuit
- Park/neutral position switch
- ECM
|
| P0850 |
Park/neutral position switch remains ON (P, N position) during driving under conditions (a) and (b) for 30 sec. (2-trip detection logic)
- Vehicle speed: 44 mph (70 km/h) or more
- Engine speed: 1,000 to 2,500 rpm
|
- Short in park/neutral position switch circuit
- Park/neutral position switch
- ECM
|