Rocker Panel Moulding: Removal

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR 
   1. Remove the screw, 2 clips and rocker panel moulding protector.
2. REMOVE ROCKER PANEL MOULDING LH 
   1. Remove the 2 screws and 5 clips.
      Fig 1: Identifying Rocker Panel Moulding LH Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the 5 screws, 5 clips and moulding.
      Fig 2: Identifying Rocker Panel Moulding Clips And Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002