Rear Spoiler: Installation

HINT:

• When installing the spoiler, heat the body and spoiler using a heat light.

  Heating temperature 

  ITEM DESCRIPTION CHART
  
  

  Item	Temperature
  Body	40 to 60°C (104 to 140°F)
  Spoiler	20 to 30°C (68 to 86°F)

• A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL REAR SPOILER SUB-ASSEMBLY 
   1. Clean the luggage compartment door surface:
      1. Using a heat light, heat the luggage compartment door surface.
         NOTE: Do not heat the luggage compartment door excessively.
      2. Remove the double-sided tape from the luggage compartment door.
      3. Wipe off the stains with cleaner.
   2. If reusing the spoiler:

      Clean the spoiler.

      1. Using a heat light, heat the spoiler.
         NOTE: Do not heat the spoiler excessively.
      2. Remove the double-sided tape from the spoiler.
      3. Wipe off the stains with cleaner.
      4. Apply new double-sided tape to the spoiler as shown in the illustration.
      5. Remove the peeling paper from the spoiler.

         HINT:

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      6. Install the spoiler to the luggage compartment door.
2. INSTALL LUGGAGE COMPARTMENT DOOR COVER 
   1. Install the luggage compartment door cover (see REASSEMBLY ).
      Fig 1: Identifying Double Sided Tape On Spoiler

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002