LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting >> Turn Signal Light Switch >> Removal

Turn Signal Light Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (See  REMOVAL  ) 
  3. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (See  REMOVAL  ) 
  4. REMOVE STEERING COLUMN COVER UPPER 
  5. REMOVE STEERING COLUMN COVER LOWER 
  6. REMOVE TURN SIGNAL SWITCH ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 2 screws and switch.
      Fig 1: Identifying Turn Signal Switch Screws
      G05292776Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals