Rear Side Marker Light Assembly: Installation

HINT:

• Use the same procedures for the RH and LH side.
• The procedures listed below are for the LH side.

1. INSTALL REAR SIDE MARKER LIGHT LENS LH 
   1. Install the lens with the screw.
      Fig 1: Identifying Rear Side Marker Light Lens Screw

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL REAR BUMPER COVER 
   1. Remove the rear bumper cover (see INSTALLATION ).
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
4. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.