LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting >> License Plate Light Assembly >> Installation

License Plate Light Assembly: Installation

  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY 
    1. Attach the claw to install the license plate light.
      Fig 1: Locating License Plate Light Claws
      G05292766Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL REAR BUMPER COVER (See  INSTALLATION  ) 
  3. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE RH (See  REASSEMBLY  ) 
  4. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE LH (See  REASSEMBLY  ) 
  5. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT (See  REASSEMBLY  ) 
  6. INSTALL REAR FLOOR FINISH SIDE PLATE LH (See  REASSEMBLY  ) 
  7. INSTALL REAR FLOOR FINISH SIDE PLATE RH (See  REASSEMBLY  ) 
  8. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER LOWER (See  REASSEMBLY  ) 
  9. INSTALL TONNEAU COVER ASSEMBLY (See  REASSEMBLY  ) 
  10. INSTALL TONNEAU COVER STOPPER SUB-ASSEMBLY RH (See  REASSEMBLY  ) 
  11. INSTALL TONNEAU COVER STOPPER SUB-ASSEMBLY LH (See  REASSEMBLY  ) 
  12. INSTALL LUGGAGE COMPARTMENT TRIM REAR COVER SUB-ASSEMBLY (See  REASSEMBLY  ) 
  13. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (See  REASSEMBLY  ) 
  14. INSTALL TOOL BOX COVER (See  REASSEMBLY  ) 
  15. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH (See  REASSEMBLY  ) 
  16. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH (See  REASSEMBLY  ) 
  17. INSTALL LUGGAGE COMPARTMENT FLOOR MAT 
  18. INSTALL SPARE TIRE 
  19. INSTALL SPARE WHEEL COVER ASSEMBLY 
  20. INSTALL REAR FLOOR FINISH PLATE (See  REASSEMBLY  ) 
  21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  22. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals