High Mounted Stop Light Assembly: Installation

INSTALL CENTER STOP LIGHT ASSEMBLY
1. Clean the vehicle body surface.
  1. Using a heat light, heat the vehicle body surface.
  2. Remove the double-sided tape from the vehicle body.
  3. Wipe off stains with cleaner.
  4. Remove the double-sided tape from the center stop light.
  5. Wipe off stains with cleaner.
2. Install the center stop light.
  1. Apply new double-sided tape to the center stop light as shown in the illustration.
  2. Using a heat light, heat the vehicle body and center stop light.
    
    Fig 1: Identifying Double-Sided Tape Applying Area On Center Stop Light
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. Install the center stop light with the 2 nuts.
    
    Fig 2: Identifying Center Stop Light Nuts
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LUGGAGE COMPARTMENT DOOR COVER (See REASSEMBLY )
INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.