Fog Light Assembly: Adjustment

ADJUST FOG LIGHT AIMING
1. Make sure that the tire inflation pressure is the specified value (120 kPa (1.2 kgf/cm² , 17 psi)).
2. Start the engine.
3. Insert the screwdriver tip into the hole in the front bumper and rotate the aiming screw while observing through the front bumper (vertical adjustment).
  
  Fig 1: Inserting Screwdriver Tip Into Hole In Front Bumper
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Rotating the screwdriver clockwise aims the fog light axis downward, and rotating counterclockwise aims it upward.