Back-Up Light Assembly: Removal

HINT:

• Use the same procedures for the RH and LH side.
• The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
   CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE BACK-UP LIGHT LENS LH 
   1. Disconnect the connector.
   2. Remove the 2 bolts and lens.
      Fig 1: Identifying Back-Up Light Lens Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002