Back-Up Light Assembly: Installation

HINT:

• Use the same procedures for the RH and LH side.
• The procedures listed below are for the LH side.

1. INSTALL BACK-UP LIGHT LENS LH 
   1. Install the lens with the 2 bolts.
      Fig 1: Identifying Back-Up Light Lens Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Connect the connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
3. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.