Stereo Component Speaker: Installation

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. INSTALL STEREO COMPONENT SPEAKER ASSEMBLY 
   1. Install the speaker with the 4 screws.
      Fig 1: Locating Stereo Component Speaker And Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Connect the connector.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (See  REASSEMBLY  ) 
3. INSTALL FRONT DOOR WINDOW UPPER BRACKET GARNISH LH (See  REASSEMBLY  ) 
4. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH (See  REASSEMBLY  ) 
5. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (See  REASSEMBLY  ) 
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
7. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.