Stereo Component Amplifier: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE REAR FLOOR FINISH PLATE (See REMOVAL )
REMOVE LUGGAGE COMPARTMENT FLOOR MAT
REMOVE LUGGAGE COMPARTMENT TRIM COVER LH (See REMOVAL )
REMOVE LUGGAGE COMPARTMENT TRIM COVER RH (See REMOVAL )
REMOVE SPARE WHEEL COVER ASSEMBLY
REMOVE TOOL BOX COVER (See REMOVAL )
REMOVE LUGGAGE COMPARTMENT TRIM COVER SUB-ASSEMBLY REAR (See REMOVAL )
REMOVE TONNEAU COVER ASSEMBLY (See REMOVAL )
REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LOWER (See REMOVAL )
REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT (See REMOVAL )
REMOVE LUGGAGE COMPARTMENT TRAY BRACKET FRONT (See INSTALLATION )
REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY
1. w/o Mark Levinson Sound System:
  1. Remove the 2 bolts and nut.
  2. Disconnect the 2 connectors, then remove the amplifier.
    
    Fig 1: Locating Stereo Component Amplifier Bolts And Nut
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. w/ Mark Levinson Sound System:
  1. Remove the 2 bolts and nut.
  2. Disconnect the 2 connectors, then remove the amplifier.
    
    Fig 2: Locating Stereo Component Amplifier Bolts And Nut
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 AMPLIFIER BRACKET
1. Remove the 2 screws and bracket.
  
  Fig 3: Locating No. 1 Amplifier Bracket And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 AMPLIFIER BRACKET
1. Remove the 2 screws and bracket.
  
  Fig 4: Locating No. 2 Amplifier Bracket And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002