Rear Speaker: Installation

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. INSTALL REAR SPEAKER ASSEMBLY LH 
   1. Install the speaker with the 3 screws.
      Fig 1: Locating Rear Speaker Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Install the clamp.
   3. Connect the connector.
2. INSTALL QUARTER TRIM PANEL ASSEMBLY FRONT LH 
3. INSTALL DOOR SCUFF PLATE ASSEMBLY LH (See  INSTALLATION  ) 
4. INSTALL REAR SEATBACK ASSEMBLY (See  DISASSEMBLY  ) 
5. INSTALL REAR SEAT HEADREST ASSEMBLY (See  DISASSEMBLY  ) 
6. INSTALL REAR SEAT HEADREST PLATE (See  INSTALLATION  ) 
7. INSTALL WIND DEFLECTOR BOARD ASSEMBLY (See  INSTALLATION  ) 
8. INSTALL REAR SEAT HEADREST PLATE COVER (See  INSTALLATION  ) 
9. INSTALL REAR SEAT CUSHION ASSEMBLY (See  INSTALLATION  ) 
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
11. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
       NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.