Front No. 1 Speaker: Installation

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY 
   1. Install the speaker with the bolt.
      Fig 1: Locating Speaker Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Connect the connector.
2. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (See  REASSEMBLY  ) 
3. REMOVE FRONT DOOR WINDOW UPPER BRACKET GARNISH LH (See  REASSEMBLY  ) 
4. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH (See  REASSEMBLY  ) 
5. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (See  REASSEMBLY  ) 
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
7. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.