Inspection Procedure

1. Check the DATA LIST for proper functioning of the combination switch.

   Turn signal switch 

   DATA LIST - TURN SIGNAL SWITCH
   
   

   Item	Measurement Item / Display (Range)	Normal Condition	Diagnostic Note
   F FOG LIGHT SW	Front fog light switch signal / ON or OFF	ON: Front fog light switch is in ON position OFF: Front fog light switch is not in ON position	-
   PASSING SW	Passing light switch signal / ON or OFF	ON: Headlight dimmer switch is in FLASH position OFF: Headlight simmer switch is not in FLASH position	-
   DIMMER HI SW	High beam switch signal / ON or OFF	ON: Headlight dimmer switch is in HI position OFF: Headlight dimmer switch is not in HI position	-
   LIGHT AUTO SW	Auto light switch signal / ON or OFF	ON: Light control switch is in AUTO position OFF: Light control switch is not in AUTO position	-
   HEAD LIGHT SW	Headlight control switch signal / ON or OFF	ON: Light control switch is in HEAD position OFF: Light control switch is not in HEAD position	-
   TAIL LIGHT SW	Taillight switch signal / ON or OFF	ON: Light control switch is in TAIL or HEAD position OFF: Light control switch is not in TAIL or HEAD position	-
   TURN LEFT SW	Turn signal switch LH signal / ON or OFF	ON: Light control switch is in LH position OFF: Light control switch is not in LH position	-
   TURN RIGHT SW	Turn signal switch RH signal / ON or OFF	ON: Light control switch is in RH position OFF: Light control switch is not in RH position	-

   OK: ON (switch normal position) appears on the screen. 

NG: REPLACE TURN SIGNAL SWITCH ASSEMBLY 

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE