LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Supplemental Restraint System) >> Seat Position Sensor >> Removal

Seat Position Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 
    CAUTION: Read PRECAUTION  thoroughly before servicing .
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
  3. REMOVE FRONT SEAT ASSEMBLY LH  (See REMOVAL )
  4. REMOVE SEAT POSITION SENSOR 
    1. Disconnect the connector from the seat position sensor.
    2. Remove the bolt and the seat position sensor.
      Fig 1: Identifying Seat Position Sensor Bolts
      G05113345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals