Rear Power Outlet Socket: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL POWER OUTLET SOCKET COVER
1. Connect the connector.
2. Engage the 8 claws and install the power outlet socket cover.
  
  Fig 1: Identifying Power Outlet Socket Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)