LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (Power Outlets) >> Power Outlet Socket >> Removal

Power Outlet Socket: Removal

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)  (See REMOVAL )
  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)  (See REMOVAL )
  5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE BOX BOTTOM MAT  (See REMOVAL )
  7. REMOVE CONSOLE BOX ASSEMBLY REAR  (See REMOVAL )
  8. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE POWER OUTLET SOCKET 
    1. Using a screwdriver, disengage the claw, then turn the power outlet socket counterclockwise and push the power outlet socket half way out.
      Fig 1: Disengaging Claw Using Screwdriver
      G05114248Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and then push the power outlet socket out.
      Fig 2: Aligning Protrusion Of Power Outlet Socket With Cutout Of Power Outlet Socket Cover
      G05114249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE POWER OUTLET SOCKET COVER 
    1. Disengage the 2 claws and remove the power outlet socket cover.
      Fig 3: Identifying Power Outlet Socket Cover Claws
      G05114250Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals