Inverter Main Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL INVERTER MAIN SWITCH BULB
1. Turn the inverter main switch bulb, in the direction indicated by the arrow in the figure below, to install it.
  
  Fig 1: Identifying Inverter Main Switch Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INVERTER MAIN SWITCH
1. Engage the 2 clips and install the inverter main switch.
  
  Fig 2: Identifying Clips For Inverter Main Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL CONSOLE BOX ASSEMBLY REAR (See INSTALLATION )
INSTALL BOX BOTTOM MAT (See INSTALLATION )
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) (See INSTALLATION )
INSTALL PARKING BRAKE HOLE COVER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)