Section 285 (Power Outlets): Clock: Removal
WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
- REMOVE INSTRUMENT PANEL GARNISH LH (See REMOVAL )
- REMOVE INSTRUMENT PANEL GARNISH RH (See REMOVAL )
- REMOVE INTEGRATION CONTROL PANEL ASSEMBLY (See REMOVAL )
- REMOVE RADIO RECEIVER ASSEMBLY (See REMOVAL )
- REMOVE CLOCK ASSEMBLY
- Disengage the 2 claws and remove the clock assembly.
HINT:
Pull the clock assembly out in the direction shown in the figure below to remove it.
- Disengage the 2 claws and remove the clock assembly.