LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 277 (Starting System) >> Ignition Switch >> Removal

Ignition Switch: Removal

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE IGNITION SWITCH ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 2 screws, then remove the ignition switch.
      Fig 1: Identifying Ignition Switch Screws
      G05109970Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals