Stop Light Switch: Inspection

INSPECT STOP LIGHT SWITCH

Remove the stop light switch.
Measure the resistance according to the value(s) in the table below.

Fig 1: Inspecting Stop Light Switch

G04980212

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Resistance

TESTER CONNECTION SPECIFIED CONDITION REFERENCE CHART

Tester Connection	Switch position	Specified condition
1 - 2	Switch pin free	10 kΩ or higher
3 - 4	Switch pin free	Below 1 Ω
1 - 2	Switch pin pushed in	Below 1 Ω
3 - 4	Switch pin pushed in	10 kΩ or higher

If the result is not as specified, replace the stop light switch.