Personal Light Assembly: Inspection

1. Remove the personal light assembly.
2. Connect the battery positive (+) lead to terminal 17 and negative (-) lead to terminal 6.
Fig 1: Identifying Personal Light Assembly Connector Terminals
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Turn the personal light switch in DOOR position.
4. Check that the light comes on.
5. Connect the battery positive (+) lead to terminal 17 and negative (-) lead to terminal 5.
6. Turn the personal light switch in ON position.
7. Check that the light comes on.

OK: Comes on 

If the light does not come on, replace the personal light assembly.