Oil Cooler Assembly: Installation

INSTALL OIL NO.1 COOLER ASSEMBLY
1. Install the air duct with the 3 bolts.
  Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)
  
  Fig 1: Locating Air Duct With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the oil cooler assembly with the 3 bolts.
  Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)
  
  Fig 2: Locating Oil Cooler Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 2 oil cooler hoses.
INSTALL FRONT BUMPER ASSEMBLY
(See INSTALLATION )
ADD AND INSPECT HYBRID TRANSAXLE FLUID (See HYBRID TRANSAXLE FLUID )
INSTALL ENGINE UNDER COVER NO.1 (See INSTALLATION )