LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Battery Management Systems >> Hybrid Battery Control >> Battery Fuse >> Installation

Battery Fuse: Installation

  1. INSTALL ELECTRIC VEHICLE FUSE 
    NOTE: Wear insulating gloves.
    1. Install the electric vehicle battery fuse with the 2 bolts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Install the fuse block cover.
  2. INSTALL BATTERY CARRIER BRACKET (See  INSTALLATION  ) 
  3. INSTALL FLOOR CARPET ASSEMBLY FRONT (See  INSTALLATION  ) 
  4. INSTALL AIR INTAKE COVER CENTER (See  INSTALLATION  ) 
  5. INSTALL AIR INTAKE COVER (See  INSTALLATION  ) 
  6. INSTALL REAR SEAT ASSEMBLY LH  (See INSTALLATION )
  7. INSTALL REAR SEAT TRACK BRACKET COVER 
  8. INSTALL REAR SEAT ASSEMBLY RH  (See INSTALLATION )
  9. INSTALL REAR SEAT TRACK BRACKET COVER 
  10. INSPECT SLIDE ADJUSTER LOCK SIMULTANEOUSLY  (See INSTALLATION )
  11. INSTALL SERVICE PLUG GRIP (See  INSTALLATION  ) 
  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  13. PERFORM INITIALIZATION 

    Some systems need initialization when disconnecting the cable from the negative battery terminal. (See INITIALIZATION )

scientia non olet · About LEMON Manuals