Inspection Procedure

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FUSE (ACC)
1. Remove the ACC fuse from the cowl side junction block LH.
2. Measure the resistance of the fuses.
  Standard resistance:
  
  Below 1 Ω
- NG: REPLACE FUSE
- OK: GO TO NEXT STEP

CHECK DISC PLAYER CHANGER

Disconnect the D26 changer connector.

Measure the resistance of the wire harness side connector.

Standard resistance

DISC PLAYER CHANGER (RESISTANCE)

Tester Connection	Specified Condition
D26-20 (GND) - Body ground	Below 1 Ω

Measure the voltage of the wire harness side connector.

Standard voltage

DISC PLAYER CHANGER (VOLTAGE)

Tester Connection	Condition	Specified Condition
D26-1 (ACC) - Body ground	Ignition switch ACC	10 to 14 V

NG: REPAIR OR REPLACE HARNESS AND CONNECTOR
OK: REPLACE DISC PLAYER CHANGER