Inspection Procedure
WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FUSE (ECG-IG1)
- Remove the ECG-IG1 fuse from the cowl side junction block LH.
Standard resistance:
Below 1 Ω
- NG: REPLACE FUSE
- OK: GO TO NEXT STEP
- Remove the ECG-IG1 fuse from the cowl side junction block LH.
- CHECK MULTI-DISPLAY POWER SOURCE CIRCUIT
- NG: REPAIR OR REPLACE HARNESS AND CONNECTOR
- OK: REPLACE MULTI-DISPLAY