Cursor or MAP Rotates when Vehicle Stopped

WARNING: This page is about a different car, the 2006 Lexus RX 400h. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CONDITION
1. Check with the customer if the vehicle has been turned by a turntable.
  OK: Vehicle has not been turned by turntable.
  
  Fig 1: Identifying Vehicle Stopped Condition
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  If the vehicle is rotated on a turntable with the ignition switch on, the system may store the angular velocity. As a result, the vehicle position cursor may deviate.
NG: TURN IGNITION SWITCH TO ON POSITION WHEN VEHICLE IS COMPLETELY STOPPED

OK: RETURN TO THE ORIGINAL INSPECTION FLOW BECAUSE THE CHECK RESULT IS NORMAL