Torque Specifications
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
for 0.8 kW Type
TORQUE SPECIFICATIONS - 1NZ-FE STARTING (FOR 0.8 KW TYPE)
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Starter assembly x Transaxle housing | 37 | 377 | 27 |
| Starter assembly x Terminal 30 | 9.8 | 100 | 7.2 |
| Negative battery terminal x Negative battery cable | 5.4 | 55 | 48 in.*lbf |
| Starter brush holder assembly x Commutator end frame | 1.5 | 15 | 13 in.*lbf |
| Starter yoke assembly x Commutator end frame | 5.9 | 60 | 52 in.*lbf |
| Magnet starter switch assembly x Starter housing | 8.3 | 85 | 73 in.*lbf |
| Terminal C x Lead wire | 9.8 | 100 | 87 in.*lbf |
for 1.6kW Type
TORQUE SPECIFICATIONS - 1NZ-FE STARTING (FOR 1.6 KW TYPE)
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Starter assembly x Transaxle housing | 37 | 377 | 27 |
| Starter assembly x Terminal 30 | 9.8 | 100 | 7.2 |
| Negative battery terminal x Negative battery cable | 5.4 | 55 | 48 in.*lbf |
| Starter yoke assembly x Starter commutator end frame assembly | 6 | 61 | 53 in.*lbf |
| Magnet switch body x Starter drive housing assembly | 7.5 | 76 | 66 in.*lbf |
| Terminal C x Lead wire | 10 | 102 | 7.4 |