LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 322 (Engine Control System (2GR-FE)) >> Accelerator Pedal Rod >> Installation

Accelerator Pedal Rod: Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ACCELERATOR PEDAL ROD 
    1. Install the accelerator pedal rod with the 2 bolts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      Fig 1: Locating Accelerator Pedal Rod Bolts
      G05183872Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the accelerator pedal position sensor connector.
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals