How To Proceed With Troubleshooting
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
- Use the following procedures to troubleshoot the occupant classification system.
- *: Use the Techstream.
- VEHICLE BROUGHT TO WORKSHOP
- PASSENGER AIRBAG ON/OFF INDICATOR CHECK
- DTC CHECK (Present and Past DTC)*
- Check for DTCs (see DTC CHECK / CLEAR
).
Result
RESULTResult Proceed to DTC is output. A DTC is not output. B
B: GO TO PROBLEM SYMPTOMS TABLE
A: Go to next step
- Check for DTCs (see DTC CHECK / CLEAR
).
- DTC CHART
- REPAIR OR REPLACEMENT
- DTC CLEARANCE (Present and Past DTCs)*
- Clear the DTCs (see DTC CHECK / CLEAR ).
- DTC CHECK (Present and Past DTCs)*
- Check for DTCs (see DTC CHECK / CLEAR
).
Result
RESULTResult Proceed to DTC is not output. A DTC is output. B
B: Go to step 5
A: Go to next step
- Check for DTCs (see DTC CHECK / CLEAR
).
- PROBLEM SYMPTOMS SIMULATION
- Check the passenger airbag ON/OFF indicator condition (see DIAGNOSIS SYSTEM
).
Result
RESULTResult Proceed to Passenger airbag ON/OFF indicator is operating normally. A Passenger airbag ON/OFF indicator (OFF) is not operating normally. B
B: Go to step 5
A: Go to next step
- Check the passenger airbag ON/OFF indicator condition (see DIAGNOSIS SYSTEM
).
- CONFIRMATION TEST
NEXT: END