LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Lighting) >> Stop Light Switch >> Inspection

Stop Light Switch: Inspection

WARNING: This page is about a different car, the 2006 Lexus RX 400h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT STOP LIGHT SWITCH 
    1. Remove the stop light switch.
    2. Measure the resistance according to the value(s) in the table below.

      Resistance 

      TESTER CONNECTION - SPECIFIED CONDITION (RESISTANCE)

      Tester Connection Switch Position Specified Condition
      1 - 2 Switch pin free 10 kΩ or higher
      3 - 4 Switch pin free Below 1 Ω
      1 - 2 Switch pin pushed in Below 1 Ω
      3 - 4 Switch pin pushed in 10 kΩ or higher
      Fig 1: Inspecting Stop Light Switch
      G04115152Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the stop light switch.

scientia non olet · About LEMON Manuals