LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Brake Control System) >> Yaw Rate And Deceleration Sensor >> Inspection

Yaw Rate And Deceleration Sensor: Inspection

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT YAW RATE AND DECELERATION SENSOR 
    1. Check the yaw rate and deceleration sensor.

      If any of the following occurs, replace the yaw rate and deceleration sensor with a new one.

      • The surface of the yaw rate and deceleration sensor is cracked, dented or chipped.
      • The connector is scratched, cracked, or damaged.
      • The yaw rate and deceleration sensor has been dropped.
scientia non olet · About LEMON Manuals