Power Outlet Socket: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL POWER OUTLET SOCKET COVER
1. Engage the 2 claws and install a new power outlet socket cover.
  
  Fig 1: Identifying New Power Outlet Socket Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL POWER OUTLET SOCKET
1. Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and install the power outlet socket.
  
  Fig 2: Identifying Protrusion Of Power Outlet Socket With Cutout Of Power Outlet Socket Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Securely engage the claw.
INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL CONSOLE BOX ASSEMBLY REAR (See INSTALLATION )
INSTALL BOX BOTTOM MAT (See INSTALLATION )
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) (See INSTALLATION )
INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)