Section 257 (Charging System): Generator: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE ENGINE UNDER COVER RH
REMOVE FAN AND GENERATOR V BELT (See REMOVAL )
REMOVE GENERATOR ASSEMBLY
1. Remove the terminal cap.
2. Separate the connector and the harness clamp.
3. Remove the nut and remove terminal B.
  
  Fig 1: Locating Connector & Harness Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove fan belt adjusting slider fixing bolts A and B and remove the fan belt adjusting slider.
  
  Fig 2: Identifying Fan Belt Adjusting Slider Fixing Bolts A & B
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove fixing bolt B and remove the generator.
  
  Fig 3: Identifying Fixing Bolt B
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002