LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Starting System) >> Ignition Relay >> Inspection

Ignition Relay: Inspection

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT IGNITION RELAY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance 

        IGNITION RELAY

        Tester Connection Specified Condition
        3-5 Below 1 ohms (when battery voltage applied to terminals 1 and 2)
        10 k ohms or higher
        Fig 1: Measuring Resistance Between Ignition Relay Terminals
        G04829441Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the relay.