How To Proceed With Troubleshooting

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the following procedures to troubleshoot the occupant classification system.
*: Use the intelligent tester.

VEHICLE BROUGHT TO WORKSHOP
PASSENGER AIRBAG ON/OFF INDICATOR CHECK

DTC CHECK (Present and Past DTC)*

Check for DTCs (see DTC CHECK / CLEAR ).

Result

RESULT CHART

Result	Proceed to
DTC Is output.	A
DTC Is not output.	B

B: GO TO PROBLEM SYMPTOMS TABLE

A: GO to Next Step

DTC CHART
REPAIR OR REPLACEMENT
DTC CLEARANCE (Present and Past DTCs)*
1. Clear the DTCs (see DTC CHECK / CLEAR ).

DTC CHECK (Present and Past DTCs)*

Check for DTCs (see DTC CHECK / CLEAR ).

Result

RESULT CHART

Result	Proceed to
DTC is not output.	A
DTC is output.	B

B: GO to step 5

A: GO to Next Step

PROBLEM SYMPTOMS SIMULATION

Check the passenger airbag ON/OFF indicator condition (see DIAGNOSIS SYSTEM ).

Result

RESULT CHART

Result	Proceed to
Passenger airbag ON/OFF indicator is operating normally.	A
Passenger airbag ON/OFF Indicator (OFF) is not operating normally.	B

B: GO to step 5

A: GO to Next Step

CONFIRMATION TEST
NEXT: END